Steel structure drawings are not a single document. A project uses several sets, each for a different reader: the designer, the fabricator, the erection crew and the inspector. Knowing which set shows what helps owners review them and avoid confusion between design drawings and fabrication drawings.
The main sets of steel structure drawings
- Design or structural drawings. Made by the engineer of record. They show the layout, the member sizes, the loads and the main connection types.
- General arrangement (GA) drawings. Plans and elevations showing where members go, with grid lines and levels.
- Shop drawings. Detailed drawings of each member and connection, with dimensions, holes, welds and marks, for the workshop. See shop drawing approval.
- Erection drawings. Show the sequence, the piece marks and the connection details for the site crew.
- Anchor bolt drawings. Show the position of bolts for the foundation. See anchor bolts and base plates.
- As-built drawings. The final record after erection.
The conventions for such documents are described in this overview of technical drawing.
What each set tells you
The design drawings say what the structure must be. The shop drawings say exactly how each piece is made. The erection drawings say how to put the pieces together. All three must agree. If they do not, the shop drawing normally has to be corrected, and the engineer should confirm.


Marks and references
Each member has a mark that appears on the shop drawing, on the piece and on the erection drawing. Marks link the three. Our guide to steel member marking and packing lists explains how marks reach the site.
How steel structure drawings are produced
Modern detailers build a 3D model and produce the drawings from it, which keeps them consistent. Our articles on BIM for steel detailing and on Tekla-based detailing describe the process.
Reviewing a set
- Check the grid, levels and overall dimensions against the structural drawings
- Check member sizes, grades and quantities
- Check connection details and bolt and weld sizes. See bolted or welded connections.
- Check weld symbols. See fillet weld vs groove weld.
- Check coating notes and special requirements
- Check splice positions against transport limits
Coordination between sets
One change can touch several sheets: a larger beam changes the shop drawing, the erection drawing and sometimes the anchor bolt drawing. Ask the detailer to list the sheets affected by each change. This list is a simple way to catch drawings that were not updated, and it makes the approval cycle shorter.
Revision control
Every sheet carries a revision letter and a date. Superseded sheets must be withdrawn, and the revision log must be updated. Work only from the latest revision, and record who approved what. Late changes are the main cause of rework, as described in steel structure project schedule.
What to ask a supplier
When you compare structural steel fabricators, ask to see a sample drawing set, the revision log and the review process. A supplier with clear sets will show them quickly. Our guide to how a steel structure project moves from drawings to erection shows where each set fits.
If you need to coordinate drawings for a steel package, share the set and the schedule, and discuss your structural design requirements with our engineering team.
Frequently Asked Questions
What is the difference between design drawings and shop drawings?
Design drawings show what the structure must be. Shop drawings show how each piece is made, with every dimension and detail.
Who approves shop drawings?
Usually the engineer of record or the client’s representative, as stated in the contract.
Do I need erection drawings?
Yes, for the site crew. They show where each piece goes and how it connects.
Free quotation · Reply within 24 working hours
Request a quotation for steel structure drawings
Tell us about your steel structure project. Our engineering and sales team will reply with a tailored proposal, usually within 24 working hours.
Need an answer faster? Call our engineers directly.
Mon–Fri 8:00–17:30 · Sat 8:00–12:00 (GMT+7)





