Truong Thinh Corp manufactures pre-engineered steel buildings in SAP2000 and Tekla Structures, fabricated under ISO 9001:2015 at a 25,000 m² Vietnam plant — not resized from a generic catalog frame.
| Specification | Truong Thinh PEB System |
|---|---|
| Clear span | 20–60 m, tapered built-up portal frame |
| Steel grade | Q235/Q345 equivalent or ASTM A36/A572 (per governing design code) |
| Design code | TCVN, AISC or Eurocode — per project requirement |
| Structural analysis | SAP2000 |
| Shop drawings & take-off | Tekla Structures |
| Coating | Sa 2.5 sandblast + primer/finish coat (heavier-duty or hot-dip galvanizing available) |
| Fabrication capacity | 1,200–1,500 tons/month |
| Quality system | ISO 9001:2015 |
Components are shop-fabricated to exact dimensions and bolted or welded on site — cutting erection time roughly a third to a half versus conventional built-up framing.
Tapered built-up sections and engineered purlin/girt spacing reduce tonnage versus standard hot-rolled framing for the same span and load case.
Because the frame is designed and priced as a complete system, buyers get a firmer quotation with fewer field variations than piecemeal fabrication.
Share your span, load case, and location — our engineering team will return a PEB manufacturing quotation with lead time and tonnage.
PEB portal frames comfortably span 20–60 m without interior columns, engineered per project in SAP2000.
Primary framing typically uses Q235/Q345-equivalent or ASTM A36/A572 steel depending on the governing design code (Vietnamese TCVN, AISC, or Eurocode), with mill test certificates issued per production lot.
Lead time depends on current plant backlog and connection complexity; front-loading structural design review so shop drawings are approved early is the most effective way to compress the schedule.
Yes. Structural analysis is run in SAP2000 against the project's applicable design code and provided alongside Tekla Structures shop drawings and a steel take-off.
