Skip to main content
Truong Thinh Corp - Steel Structure Manufacturer

Weld Symbols on Steel Drawings: How to Read Them

- Truong Thinh Corp

Weld symbols are the shorthand that tells the welder what to make. A small symbol on a drawing gives the weld type, size, length and finish, and whether it is made in the shop or on site. Reading them correctly prevents mistakes that are expensive to fix after steel is welded and coated.

The parts of a weld symbol

A welding symbol is built from a few standard parts, summarized in this overview of welding:

  • Reference line. A horizontal line that carries the information.
  • Arrow. Points to the joint.
  • Basic symbol. Shows the weld type, such as fillet, groove or plug.
  • Dimensions. Size, length and pitch, written beside the basic symbol.
  • Supplementary symbols. Show weld all around, field weld, flush finish and similar details.
  • Tail. Holds notes, such as the procedure number.

Standards differ in detail, so the drawing should state which standard it follows.

Arrow side and other side

The symbol above the reference line refers to one side of the joint, and the symbol below refers to the other. The arrow side is the side the arrow points to. A weld on both sides shows symbols on both sides of the line. Misreading the side is a common error.

Weld symbols on drawings become real joints: a welder joining a structural steel beam connection
Welder joining a structural steel beam connection

Common weld types on drawings

  • Fillet welds, shown as a triangle, with the leg size beside it
  • Groove welds, with shapes such as V, bevel or J, and with depth and root opening
  • Plug and slot welds for lap joints
  • Backing or back weld symbols for groove welds

Our guide to fillet weld vs groove weld explains where each type is used.

What dimensions mean

Size and length tell how big the weld is and how much of the joint it covers. A fillet may be continuous or intermittent, with length and pitch. If no length is stated, many conventions mean the full length of the joint, but check the standard. Do not change sizes without approval, since over-welding adds distortion.

Field welds and all-around welds

A flag on the symbol marks a weld made on site. A circle at the junction means weld all around the joint. Field welds need their own procedure and inspection, since site conditions are less controlled. See welding procedure specifications.

Finish and inspection notes

Some symbols show the finish, such as flush or ground, and some call for testing. The notes in the tail can refer to the inspection plan or to a procedure. Our guide to non-destructive testing for steel welds explains the methods, and our guide to welding defects in structural steel explains what the tests find.

How to check weld symbols in review

  1. Confirm the standard used for symbols
  2. Check that each joint has a symbol and that sides are correct
  3. Compare sizes and lengths with the design loads and the structural drawings
  4. Check that field welds are marked
  5. Check notes on testing and finish

Include this check in shop drawing approval. Our overview of steel structure drawings shows where weld symbols appear in a drawing set.

What to ask a fabricator

When you compare structural steel fabricators, ask how the detailer checks weld symbols, who reviews them and how changes are recorded. At Truong Thinh, the quality control department inspects dimensions and welds to AWS D1.1 before delivery.

If you need help to check weld details on a drawing set, send the sheets, and discuss your structural design requirements with our engineering team.

Frequently Asked Questions

Are weld symbols the same worldwide?

No. Different standards use different layouts. The drawing should name the standard, and the team should read it accordingly.

What does a flag on a weld symbol mean?

It marks a field weld, made on site. Shop welds have no flag.

Who decides the weld size?

The engineer, from the design loads. The detailer shows it on the drawing.

Free quotation · Reply within 24 working hours

Request a quotation for weld symbols

Tell us about your steel structure project. Our engineering and sales team will reply with a tailored proposal, usually within 24 working hours.

Need an answer faster? Call our engineers directly.

Mon–Fri 8:00–17:30 · Sat 8:00–12:00 (GMT+7)

Call now: +84 935 657 568
No drawings yet? Choose "No drawings yet" and send the request anyway. Our engineers will advise first.
PDF, DWG, DXF, ZIP, Excel, Word or images. Up to 5 files, 15 MB each.

Truong Thinh Corp - Author at Truong Thinh Corp
Truong Thinh Corp

Truong Thinh Corp – Steel Structure Services

We design, manufacture, supply and erect pre-engineered steel structures for factories, warehouses and industrial projects across Southeast Asia.

Request a Free Quotation